Adapt config to latest kickstart.nvim

init.lua

@@ -101,67 +101,77 @@ vim.g.maplocalleader = ' '
 vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
--- See `:help vim.opt`
+-- See `:help vim.o`
 -- NOTE: You can change these options as you wish!
 --  For more options, you can see `:help option-list`
 
 -- Make line numbers default
-vim.opt.number = true
+vim.o.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+-- vim.o.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
+vim.o.mouse = 'a'
 
 -- Don't show the mode, since it's already in the status line
-vim.opt.showmode = false
+vim.o.showmode = false
 
 -- Sync clipboard between OS and Neovim.
 --  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
 vim.schedule(function()
-  vim.opt.clipboard = 'unnamedplus'
+  vim.o.clipboard = 'unnamedplus'
 end)
 
 -- Enable break indent
-vim.opt.breakindent = true
+vim.o.breakindent = true
 
 -- Save undo history
-vim.opt.undofile = true
+vim.o.undofile = true
 
 -- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
-vim.opt.ignorecase = true
+vim.o.ignorecase = true
-vim.opt.smartcase = true
+vim.o.smartcase = true
 
 -- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
+vim.o.signcolumn = 'yes'
 
 -- Decrease update time
-vim.opt.updatetime = 250
+vim.o.updatetime = 250
 
 -- Decrease mapped sequence wait time
-vim.opt.timeoutlen = 300
+vim.o.timeoutlen = 300
 
 -- Configure how new splits should be opened
-vim.opt.splitright = true
+vim.o.splitright = true
-vim.opt.splitbelow = true
+vim.o.splitbelow = true
 
 -- Sets how neovim will display certain whitespace characters in the editor.
 --  See `:help 'list'`
 --  and `:help 'listchars'`
-vim.opt.list = true
+--
+--  Notice listchars is set using `vim.opt` instead of `vim.o`.
+--  It is very similar to `vim.o` but offers an interface for conveniently interacting with tables.
+--   See `:help lua-options`
+--   and `:help lua-options-guide`
+vim.o.list = true
 vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
 
 -- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
+vim.o.inccommand = 'split'
 
 -- Show which line your cursor is on
-vim.opt.cursorline = true
+vim.o.cursorline = true
 
 -- Minimal number of screen lines to keep above and below the cursor.
-vim.opt.scrolloff = 10
+vim.o.scrolloff = 10
+
+-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
+-- instead raise a dialog asking if you wish to save the current file(s)
+-- See `:help 'confirm'`
+vim.o.confirm = true
 
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
@@ -263,7 +273,7 @@ map('n', '<Space>bw', '<Cmd>BufferOrderByWindowNumber<CR>', opts)
 
 -- Highlight when yanking (copying) text
 --  Try it with `yap` in normal mode
---  See `:help vim.highlight.on_yank()`
+--  See `:help vim.hl.on_yank()`
 vim.api.nvim_create_autocmd('TextYankPost', {
   desc = 'Highlight when yanking (copying) text',
   group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
@@ -281,8 +291,11 @@ if not (vim.uv or vim.loop).fs_stat(lazypath) then
   if vim.v.shell_error ~= 0 then
     error('Error cloning lazy.nvim:\n' .. out)
   end
-end ---@diagnostic disable-next-line: undefined-field
+end
-vim.opt.rtp:prepend(lazypath)
+
+---@type vim.Option
+local rtp = vim.opt.rtp
+rtp:prepend(lazypath)
 
 -- [[ Configure and install plugins ]]
 --
@@ -297,30 +310,40 @@ vim.opt.rtp:prepend(lazypath)
 -- NOTE: Here is where you install your plugins.
 require('lazy').setup({
   -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
-  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+  { 'NMAC427/guess-indent.nvim', opts = {} }, -- Detect tabstop and shiftwidth automatically
 
   -- NOTE: Plugins can also be added by using a table,
   -- with the first argument being the link and the following
   -- keys can be used to configure plugin behavior/loading/etc.
   --
-  -- Use `opts = {}` to force a plugin to be loaded.
+  -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
   --
 
+  -- Alternatively, use `config = function() ... end` for full control over the configuration.
+  -- If you prefer to call `setup` explicitly, use:
+  --    {
+  --        'lewis6991/gitsigns.nvim',
+  --        config = function()
+  --            require('gitsigns').setup({
+  --                -- Your gitsigns configuration here
+  --            })
+  --        end,
+  --    }
+  --
   -- Here is a more advanced example where we pass configuration
-  -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
+  -- options to `gitsigns.nvim`.
-  --    require('gitsigns').setup({ ... })
   --
   -- See `:help gitsigns` to understand what the configuration keys do
   { -- Adds git related signs to the gutter, as well as utilities for managing changes
     'lewis6991/gitsigns.nvim',
     opts = {
-      --[[ signs = {
+      signs = {
         add = { text = '+' },
         change = { text = '~' },
         delete = { text = '_' },
         topdelete = { text = '‾' },
         changedelete = { text = '~' },
-      }, ]]
+      },
     },
   },
 
@@ -343,7 +366,7 @@ require('lazy').setup({
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
     opts = {
       -- delay between pressing a key and opening which-key (milliseconds)
-      -- this setting is independent of vim.opt.timeoutlen
+      -- this setting is independent of vim.o.timeoutlen
       delay = 0,
       icons = {
         -- set icon mappings to true if you have a Nerd Font
@@ -405,7 +428,6 @@ require('lazy').setup({
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
     event = 'VimEnter',
-    branch = '0.1.x',
     dependencies = {
       'nvim-lua/plenary.nvim',
       { -- If encountering errors, see telescope-fzf-native README for installation instructions
@@ -482,10 +504,10 @@ require('lazy').setup({
       vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
       vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
 
-      vim.keymap.set('n', '<leader>ff', builtin.find_files, { desc = 'Telescope find files' })
+      -- vim.keymap.set('n', '<leader>ff', builtin.find_files, { desc = 'Telescope find files' })
-      vim.keymap.set('n', '<leader>fg', builtin.live_grep, { desc = 'Telescope live grep' })
+      -- vim.keymap.set('n', '<leader>fg', builtin.live_grep, { desc = 'Telescope live grep' })
-      vim.keymap.set('n', '<leader>fb', builtin.buffers, { desc = 'Telescope buffers' })
+      -- vim.keymap.set('n', '<leader>fb', builtin.buffers, { desc = 'Telescope buffers' })
-      vim.keymap.set('n', '<leader>fh', builtin.help_tags, { desc = 'Telescope help tags' })
+      -- vim.keymap.set('n', '<leader>fh', builtin.help_tags, { desc = 'Telescope help tags' })
 
       -- Slightly advanced example of overriding default behavior and theme
       vim.keymap.set('n', '<leader>/', function()
@@ -521,11 +543,10 @@ require('lazy').setup({
     opts = {
       library = {
         -- Load luvit types when the `vim.uv` word is found
-        { path = 'luvit-meta/library', words = { 'vim%.uv' } },
+        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
       },
     },
   },
-  { 'Bilal2453/luvit-meta', lazy = true },
   {
     -- Main LSP Configuration
     'neovim/nvim-lspconfig',
@@ -533,16 +554,15 @@ require('lazy').setup({
       -- Automatically install LSPs and related tools to stdpath for Neovim
       -- Mason must be loaded before its dependents so we need to set it up here.
       -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
-      { 'williamboman/mason.nvim', opts = {} },
+      { 'mason-org/mason.nvim', opts = {} },
-      'williamboman/mason-lspconfig.nvim',
+      'mason-org/mason-lspconfig.nvim',
       'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
-      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
 
-      -- Allows extra capabilities provided by nvim-cmp
+      -- Allows extra capabilities provided by blink.cmp
-      'hrsh7th/cmp-nvim-lsp',
+      'saghen/blink.cmp',
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -587,42 +607,55 @@ require('lazy').setup({
             vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
           end
 
-          -- Jump to the definition of the word under your cursor.
+          -- Rename the variable under your cursor.
-          --  This is where a variable was first declared, or where a function is defined, etc.
+          --  Most Language Servers support renaming across files, etc.
-          --  To jump back, press <C-t>.
+          map('grn', vim.lsp.buf.rename, '[R]e[n]ame')
-          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
+          -- Execute a code action, usually your cursor needs to be on top of an error
+          -- or a suggestion from your LSP for this to activate.
+          map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' })
 
           -- Find references for the word under your cursor.
-          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+          map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
 
           -- Jump to the implementation of the word under your cursor.
           --  Useful when your language has ways of declaring types without an actual implementation.
-          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+          map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
+          -- Jump to the definition of the word under your cursor.
+          --  This is where a variable was first declared, or where a function is defined, etc.
+          --  To jump back, press <C-t>.
+          map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
+          -- WARN: This is not Goto Definition, this is Goto Declaration.
+          --  For example, in C this would take you to the header.
+          map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols')
 
           -- Jump to the type of the word under your cursor.
           --  Useful when you're not sure what type a variable is and you want to see
           --  the definition of its *type*, not where it was *defined*.
-          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+          map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition')
 
-          -- Fuzzy find all the symbols in your current document.
+          -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10)
-          --  Symbols are things like variables, functions, types, etc.
+          ---@param client vim.lsp.Client
-          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+          ---@param method vim.lsp.protocol.Method
-
+          ---@param bufnr? integer some lsp support methods only in specific files
-          -- Fuzzy find all the symbols in your current workspace.
+          ---@return boolean
-          --  Similar to document symbols, except searches over your entire project.
+          local function client_supports_method(client, method, bufnr)
-          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+            if vim.fn.has 'nvim-0.11' == 1 then
-
+              return client:supports_method(method, bufnr)
-          -- Rename the variable under your cursor.
+            else
-          --  Most Language Servers support renaming across files, etc.
+              return client.supports_method(method, { bufnr = bufnr })
-          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+            end
-
+          end
-          -- Execute a code action, usually your cursor needs to be on top of an error
-          -- or a suggestion from your LSP for this to activate.
-          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction', { 'n', 'x' })
-
-          -- WARN: This is not Goto Definition, this is Goto Declaration.
-          --  For example, in C this would take you to the header.
-          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
@@ -630,7 +663,7 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client:supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
+          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -657,7 +690,7 @@ require('lazy').setup({
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client:supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
+          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
             map('<leader>th', function()
               vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
             end, '[T]oggle Inlay [H]ints')
@@ -665,22 +698,40 @@ require('lazy').setup({
         end,
       })
 
-      -- Change diagnostic symbols in the sign column (gutter)
+      -- Diagnostic Config
-      -- if vim.g.have_nerd_font then
+      -- See :help vim.diagnostic.Opts
-      --   local signs = { ERROR = '', WARN = '', INFO = '', HINT = '' }
+      vim.diagnostic.config {
-      --   local diagnostic_signs = {}
+        severity_sort = true,
-      --   for type, icon in pairs(signs) do
+        float = { border = 'rounded', source = 'if_many' },
-      --     diagnostic_signs[vim.diagnostic.severity[type]] = icon
+        underline = { severity = vim.diagnostic.severity.ERROR },
-      --   end
+        signs = vim.g.have_nerd_font and {
-      --   vim.diagnostic.config { signs = { text = diagnostic_signs } }
+          text = {
-      -- end
+            [vim.diagnostic.severity.ERROR] = '󰅚 ',
+            [vim.diagnostic.severity.WARN] = '󰀪 ',
+            [vim.diagnostic.severity.INFO] = '󰋽 ',
+            [vim.diagnostic.severity.HINT] = '󰌶 ',
+          },
+        } or {},
+        virtual_text = {
+          source = 'if_many',
+          spacing = 2,
+          format = function(diagnostic)
+            local diagnostic_message = {
+              [vim.diagnostic.severity.ERROR] = diagnostic.message,
+              [vim.diagnostic.severity.WARN] = diagnostic.message,
+              [vim.diagnostic.severity.INFO] = diagnostic.message,
+              [vim.diagnostic.severity.HINT] = diagnostic.message,
+            }
+            return diagnostic_message[diagnostic.severity]
+          end,
+        },
+      }
 
       -- LSP servers and clients are able to communicate to each other what features they support.
       --  By default, Neovim doesn't support everything that is in the LSP specification.
-      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+      --  When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities.
-      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+      --  So, we create new capabilities with blink.cmp, and then broadcast that to the servers.
-      local capabilities = vim.lsp.protocol.make_client_capabilities()
+      local capabilities = require('blink.cmp').get_lsp_capabilities()
-      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
 
       -- Enable the following language servers
       --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
@@ -752,21 +803,22 @@ require('lazy').setup({
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
         'stylua', -- Used to format Lua code
-        'clang-format', -- Used to format C/C++ files
       })
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
       require('mason-lspconfig').setup {
-        handlers = {
+        ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
-          function(server_name)
+        automatic_enable = true, -- automatically enable servers that are installed
-            local server = servers[server_name] or {}
+        -- handlers = {
-            -- This handles overriding only values explicitly passed
+        --   function(server_name)
-            -- by the server configuration above. Useful when disabling
+        --     local server = servers[server_name] or {}
-            -- certain features of an LSP (for example, turning off formatting for ts_ls)
+        --     -- This handles overriding only values explicitly passed
-            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+        --     -- by the server configuration above. Useful when disabling
-            require('lspconfig')[server_name].setup(server)
+        --     -- certain features of an LSP (for example, turning off formatting for ts_ls)
-          end,
+        --     server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
-        },
+        --     require('lspconfig')[server_name].setup(server)
+        --   end,
+        -- },
       }
     end,
   },
@@ -791,24 +843,22 @@ require('lazy').setup({
         -- Disable "format_on_save lsp_fallback" for languages that don't
         -- have a well standardized coding style. You can add additional
         -- languages here or re-enable it for the disabled ones.
-        local disable_filetypes = { c = true, cpp = true }
+        -- local disable_filetypes = { c = true, cpp = true }
-        local lsp_format_opt
+        -- if disable_filetypes[vim.bo[bufnr].filetype] then
-        if disable_filetypes[vim.bo[bufnr].filetype] then
+        --   return nil
-          lsp_format_opt = 'never'
+        -- else
-        else
-          lsp_format_opt = 'fallback'
-        end
         return {
           timeout_ms = 500,
-          lsp_format = lsp_format_opt,
+          lsp_format = 'fallback',
         }
+        -- end
       end,
       formatters_by_ft = {
         lua = { 'stylua' },
         c = { 'clang-format' },
         cpp = { 'clang-format' },
         -- Conform can also run multiple formatters sequentially
-        python = { 'isort', 'black' },
+        -- python = { "isort", "black" },
         --
         -- You can use 'stop_after_first' to run the first available formatter from the list
         -- javascript = { "prettierd", "prettier", stop_after_first = true },
@@ -817,12 +867,14 @@ require('lazy').setup({
   },
 
   { -- Autocompletion
-    'hrsh7th/nvim-cmp',
+    'saghen/blink.cmp',
-    event = 'InsertEnter',
+    event = 'VimEnter',
+    version = '1.*',
     dependencies = {
-      -- Snippet Engine & its associated nvim-cmp source
+      -- Snippet Engine
       {
         'L3MON4D3/LuaSnip',
+        version = '2.*',
         build = (function()
           -- Build Step is needed for regex support in snippets.
           -- This step is not supported in many windows environments.
@@ -843,93 +895,74 @@ require('lazy').setup({
           --   end,
           -- },
         },
+        opts = {},
       },
-      'saadparwaiz1/cmp_luasnip',
+      'folke/lazydev.nvim',
-
-      -- Adds other completion capabilities.
-      --  nvim-cmp does not ship with all sources by default. They are split
-      --  into multiple repos for maintenance purposes.
-      'hrsh7th/cmp-nvim-lsp',
-      'hrsh7th/cmp-path',
     },
-    config = function()
+    --- @module 'blink.cmp'
-      -- See `:help cmp`
+    --- @type blink.cmp.Config
-      local cmp = require 'cmp'
+    opts = {
-      local luasnip = require 'luasnip'
+      keymap = {
-      luasnip.config.setup {}
+        -- 'default' (recommended) for mappings similar to built-in completions
-
+        --   <c-y> to accept ([y]es) the completion.
-      cmp.setup {
-        snippet = {
-          expand = function(args)
-            luasnip.lsp_expand(args.body)
-          end,
-        },
-        completion = { completeopt = 'menu,menuone,noinsert' },
-
-        -- For an understanding of why these mappings were
-        -- chosen, you will need to read `:help ins-completion`
-        --
-        -- No, but seriously. Please read `:help ins-completion`, it is really good!
-        mapping = cmp.mapping.preset.insert {
-          -- Select the [n]ext item
-          ['<Down>'] = cmp.mapping.select_next_item(),
-          -- Select the [p]revious item
-          ['<Up>'] = cmp.mapping.select_prev_item(),
-
-          -- Scroll the documentation window [b]ack / [f]orward
-          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
-          ['<C-f>'] = cmp.mapping.scroll_docs(4),
-
-          -- Accept ([y]es) the completion.
         --    This will auto-import if your LSP supports it.
         --    This will expand snippets if the LSP sent a snippet.
-          ['<enter>'] = cmp.mapping.confirm { select = true },
+        -- 'super-tab' for tab to accept
-
+        -- 'enter' for enter to accept
-          -- If you prefer more traditional completion keymaps,
+        -- 'none' for no mappings
-          -- you can uncomment the following lines
-          --['<CR>'] = cmp.mapping.confirm { select = true },
-          --['<Tab>'] = cmp.mapping.select_next_item(),
-          --['<S-Tab>'] = cmp.mapping.select_prev_item(),
-
-          -- Manually trigger a completion from nvim-cmp.
-          --  Generally you don't need this, because nvim-cmp will display
-          --  completions whenever it has completion options available.
-          ['<C-Space>'] = cmp.mapping.complete {},
-
-          -- Think of <c-l> as moving to the right of your snippet expansion.
-          --  So if you have a snippet that's like:
-          --  function $name($args)
-          --    $body
-          --  end
         --
-          -- <c-l> will move you to the right of each of the expansion locations.
+        -- For an understanding of why the 'default' preset is recommended,
-          -- <c-h> is similar, except moving you backwards.
+        -- you will need to read `:help ins-completion`
-          ['<C-l>'] = cmp.mapping(function()
+        --
-            if luasnip.expand_or_locally_jumpable() then
+        -- No, but seriously. Please read `:help ins-completion`, it is really good!
-              luasnip.expand_or_jump()
+        --
-            end
+        -- All presets have the following mappings:
-          end, { 'i', 's' }),
+        -- <tab>/<s-tab>: move to right/left of your snippet expansion
-          ['<C-h>'] = cmp.mapping(function()
+        -- <c-space>: Open menu or open docs if already open
-            if luasnip.locally_jumpable(-1) then
+        -- <c-n>/<c-p> or <up>/<down>: Select next/previous item
-              luasnip.jump(-1)
+        -- <c-e>: Hide menu
-            end
+        -- <c-k>: Toggle signature help
-          end, { 'i', 's' }),
+        --
+        -- See :h blink-cmp-config-keymap for defining your own keymap
+        preset = 'default',
 
         -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
         --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
       },
+
+      appearance = {
+        -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font'
+        -- Adjusts spacing to ensure icons are aligned
+        nerd_font_variant = 'mono',
+      },
+
+      completion = {
+        -- By default, you may press `<c-space>` to show the documentation.
+        -- Optionally, set `auto_show = true` to show the documentation after a delay.
+        documentation = { auto_show = false, auto_show_delay_ms = 500 },
+      },
+
       sources = {
-          {
+        default = { 'lsp', 'path', 'snippets', 'lazydev' },
-            name = 'lazydev',
+        providers = {
-            -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
+          lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 },
-            group_index = 0,
         },
-          { name = 'nvim_lsp' },
-          { name = 'luasnip' },
-          { name = 'path' },
       },
-      }
+
-    end,
+      snippets = { preset = 'luasnip' },
+
+      -- Blink.cmp includes an optional, recommended rust fuzzy matcher,
+      -- which automatically downloads a prebuilt binary when enabled.
+      --
+      -- By default, we use the Lua implementation instead, but you may enable
+      -- the rust implementation via `'prefer_rust_with_warning'`
+      --
+      -- See :h blink-cmp-config-fuzzy for more information
+      fuzzy = { implementation = 'lua' },
+
+      -- Shows a signature help window while you type arguments for a function
+      signature = { enabled = true },
+    },
   },
 
   { -- You can easily change to a different colorscheme.
@@ -944,9 +977,6 @@ require('lazy').setup({
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
       vim.cmd.colorscheme 'gruvbox'
-
-      -- You can configure highlights by doing something like:
-      vim.cmd.hi 'Comment gui=none'
     end,
   },